Alloy Steel Gr WP12 Buttweld Fittings

What is Alloy Steel Gr WP12 Buttweld Fittings

Sumit Impex is a popular maker and shipper of Alloy Steel A234 WP12 Pipe Fittings, which is the standard term hinting steels with other alloying portions included intentionally not just the carbon. Mix Steel A234 WP12 Butt Weld Pipe Fittings is alloyed with more than eight percent of its weight being different fragments bordering iron and carbon and it is high compound steel. Composite Steel A234 WP12 Butt Weld Fittings are added to pass on explicit properties that are not found in standard carbon steel. The fragments are fused moving degrees (or blends) making ASTM A234 WP12 Alloy Steel Pipe Fittings go confronting various edges, for example, broadened hardness, expanded deterioration confirmation, broadened quality, improved formability (adaptability).maker and dealer of ASTM A234 WP12 Butt Weld Fittings, which are used where the broadness of the pipe on the upstream side of the fitting (for instance where stream is coming from) is greater than the downstream side. Rather than a concentric reducer, which takes after a cone, unusual reducers have an edge that is parallel to the interfacing channel.

Alloy Steel WP12 End Cap, Alloy Steel WP12 180 Deg Bend, Alloy Steel 3d Pipe Bend, ASTM A234 Alloy Steel WP12 Long Stub End, Alloy Steel WP12 Pipe Fittings, ASME SA234 Chrome Moly Alloy Steel Gr. WP12 Cross Exporter in India.

base level, which grants combined water or oil to exhaust at discouraged spots. This parallel edge achieves the two pipes having adjusted center lines, where a comparable fitting can be used in reverse as a sporadic

ASTM A234 WP12 Alloy Steel Butt Weld Pipe Fittings in vertical lines are usually concentric with the exception of if the organization oversees something different. A concentric reducer is used to join pipe fragments or chamber territories on a comparative center point.

Level liquid reducers in ASME SA 234 WP12 Alloy Steel Butt Weld Fittings are always flighty, top level (with the exception of if on control set), which envisions the improvement of air ascends in the system. The moderate social occasion of air in a concentric reducer could achieve a colossal air pocket that could over the long haul reason the direct to back off or cause cavitation when drawn into the siphon. The concentric reducer in ASTM A234 WP12 Alloy Steel Pipe Fittings is cone – framed, and is used when there is a move in estimation between channels.

Specification:- Alloy Steel Gr WP12 Buttweld Fittings

Specification	ASTM A234 / ASME SA234
Standard	EN, ISO, DIN, JIS, NPT
Dimension Standard	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness	SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Size	1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP317L Pipe Fitting
Type	Seamless / Welded / Fabricated
Pressure-Temperature Class	150LB, 300LB, 600LB, 1500LB, 2500LB.
Schedule	Schedule 5 TO Schedule XXS.
Type Of Dimension	BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313

Chemical Composition:- Alloy Steel Gr WP12 Buttweld Fittings

Grade	C	Mn	Si	S	P	Cr	Mo
A234 WP22	0.05-0.15	0.3-0.6	≤0.5	≤0.04	≤0.04	2-2.5	0.87-1.13

Mechanical Properties:- Alloy Steel Gr WP12 Buttweld Fittings

Grade	Tensile Strength (Mpa)	Yield Strength (Mpa)	Elongation %
A234 WP22	415-585	≥205	≥20

Dimensions:- Alloy Steel Gr WP12 Buttweld Fittings

Nominal Pipe Size	Outside Diameter		Caps	Straight Tees	Straight Crosses	Stub Ends
inch	mm	inch	Length (inch)	Center to End (inch)	Center to End (inch)	Lap Diameter (inch)	Long Length (inch)	Short Length (inch)
1/2	21.3	0.840	1	1	–	1 3/8	3	2
3/4	26.7	1.050	1	1 1/8	–	1 11/16	3	2
1	33.4	1.315	1 1/2	1 1/2	1 1/2	2	4	2
1 1/4	42.2	1.660	1 1/2	1 7/8	1 7/8	2 1/2	4	2
1 1/2	48.3	1.900	1 1/2	2 1/4	2 1/4	2 7/8	4	2
2	60.3	2.375	1 1/2	2 1/2	2 1/2	3 5/8	6	2 1/2
2 1/2	73.0	2.875	1 1/2	3	3	4 1/8	6	2 1/2
3	88.9	3.500	2	3 3/8	3 3/8	5	6	2 1/2
3 1/2	101.6	4.000	2 1/2	3 3/4	3 3/4	5 1/2	6	3
4	114.3	4.500	2 1/2	4 1/8	4 1/8	6 3/16	6	3
5	141.3	5.563	3	4 7/8	4 7/8	7 5/16	8	3
6	168.3	6.625	3 1/2	5 5/8	5 5/8	8 1/2	8	3 1/2
8	219.1	8.625	4	7	7	10 5/8	8	4
10	273.1	10.750	5	8 1/2	8 1/2	12 3/4	10	5
12	323.9	12.750	6	10	10	15	10	6

Pressure Rating:- Alloy Steel Gr WP12 Buttweld Fittings

(oF)	(oC)	150
-20 to 150	-29 to 66	300
200	93	265
250	121	225
300	149	185
350	177	150
400	204	-
450	232	-
500	260	-
550	288	-

Weight Chart:- Alloy Steel Gr WP12 Buttweld Fittings

DN	Schedule 10S			Schedule 40S			Schedule 80S
900 Elbow	450 Elbow	Equal tee	900 Elbow	450 Elbow	Equal tee	900 Elbow	450 Elbow	Equal tee
8	0.02	0.01	0.03	0.03	0.02	0.06	0.04	0.03	0.07
10	0.03	0.02	0.05	0.03	0.02	0.03	0.06	0.04	0.09
15	0.06	0.03	0.09	0.08	0.04	0.10	0.10	0.05	0.14
20	0.07	0.03	0.13	0.08	0.04	0.17	0.11	0.05	0.20
25	0.14	0.08	0.28	0.15	0.11	0.29	0.22	0.14	0.38
32	0.23	0.11	0.49	0.26	0.17	0.59	0.40	0.23	0.68
40	0.30	0.17	0.68	0.40	0.23	0.86	0.51	0.29	1.02
50	0.50	0.25	0.85	0.70	0.4	1.28	0.91	0.59	1.59
65	0.85	0.48	1.41	1.40	0.77	2.19	1.81	0.99	3.13
80	1.25	0.63	1.77	2.20	1.08	3.31	2.97	1.50	4.45
90	1.70	0.75	2.67	2.83	1.42	4.08	4.00	2.00	5.44
100	2.10	1.08	3.46	4.47	2.09	5.27	6.18	2.81	7.71
150	5.45	2.72	8.07	10.89	5.44	10.99	16.32	8.16	13.61
200	10.20	5.33	15.65	21.54	10.77	20.91	33.11	16.56	28.12
250	18.15	9.75	26.46	38.56	19.27	35.38	51.71	25.86	49.90
300	25.80	13.62	39.46	59.42	29.71	62.14	79.38	39.69	83.91

DN	Schedule 10S			Schedule 40S			Schedule 80S
Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee
40x.25	0.19	0.19	0.60	0.26	0.26	0.76	0.34	0.34	0.90
50x25	0.28	0.28	0.73	0.40	0.40	1.10	0.54	0.54	1.37
50x40	0.31	0.31	0.76	0.45	0.45	1.15	0.59	0.59	1.43
80x.50	0.55	0.55	1.56	1.00	1.00	2.91	1.79	1.79	3.91
100x50	0.78	0.78	2.94	1.50	1.50	4.48	1.95	1.95	6.55
100x80	0.87	0.87	3.04	1.74	1.74	4.64	2.33	2.33	6.79
150x80	1.82	1.82	6.86	3.95	3.95	9.68	5.51	5.51	11.57
150x100	1.96	1.96	7.10	4.07	4.07	11.94	5.96	5.96	11.97
200x100	3.01	3.01	13.46	6.55	6.55	17.98	9.23	9.23	24.18
200x150	3.19	3.19	14.08	6.74	6.74	18.82	10.12	10.12	25.31

Different Types:- Alloy Steel Gr WP12 Buttweld Fittings

ASTM A234 Alloy WP12 Butt weld Fitting	Alloy Steel WP12 Seamless Fitting
A234 Alloy WP12 Short Radius Elbow	Alloy Steel WP12 Concentric Reducer
Alloy WP12 Equal Tee	Alloy Steel WP12 Unequal Tee
WP12 Alloy Steel Fitting Cross	Alloy Steel WP12 Pipe Bends
Alloy Steel WP12 180 Deg bend	ASTM A234 Alloy WP12 Short Stub end
Alloy Steel WP12 End Cap	Alloy WP12 Dish Cap

Price List:- Alloy Steel Gr WP12 Buttweld Fittings

Alloy Steel WP12 Reducer
USD $2.1 – $10.03 / Kg
Alloy Steel Gr WP12 Elbow
USD $2.05 – $10.18 / Kg
WP12 Alloy Steel Bend
USD $2.45 – $10.48 / Kg
Alloy Steel WP12 Stud End
USD $2.18 – $10.81 / Kg
WP12 Alloy Steel Cross
USD $2.14 – $10.45 / Kg
ASTM A234 Alloy WP12 Long Radius Elbow
USD $2.11 – $5.2 / Kg
Alloy Steel WP12 Nipple
USD $2.13 – $10.92 / Kg

Application Industries

These material are not a single material but the name for a family of corrosion resistant steels. Like many scientific breakthrough the origins of stainless steel lies in a lucky accident. From the smallest part of zipper to the largest building skyscraper, stainless steel is an essential part of modern life.Stainless steel’s strength, resistance to corrosion and low maintenance make it the ideal material for a wide range of applications. It is also has a long life cycle and is 100% recyclable.

Construction
Bridges
Petrochemical Industry
Ship Building
Engineering
General Structural Purposes
Offshore and Onshore Services

Packaging Industries

We Sumit Impex Metal Ensure the Best Quality of Packing, Because It Plays an Important Role Especially in the Case of International Shipments in Which Consignment Passes Through Various Channels to Reach the Ultimate Destination, So We Put Extraordinary Concern Regarding Packaging.

We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,

Testings (Destructive, Non Destructive)

Mechanical Testing Such as Tensile, Elongation, Reduction of Area
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
Positive Material Identification – PMI Testing
Chemical Analysis – Spectro Analysis
Intergranular Corrosion (IGC) Test
Pitting Resistance Test
Dye Penetrant Test (DP Test)
Bend Test

Micro Test
Macro Test
Hardness Test
Flaring Test
Flattening Test
Hydrostatic Test
Radiography Test
Ultra Sonic Test (UT)
Eddy Current Testing
Impact Test

City We Deliver:-

New York, Bhopal, Howrah, Coimbatore, Chennai, Edmonton, Los Angeles, Rajkot, Mumbai, Sharjah, Cairo, Seoul, London, Jakarta, Abu Dhabi, Dammam, Nashik, Dubai, Hyderabad, Houston, Manama, Calgary, Granada, Rio de Janeiro, Navi Mumbai, Al Khobar,Kanpur, Hong Kong, Nagpur, Hanoi, Chandigarh, La Victoria, Kuala Lumpur, Bogota, Visakhapatnam.

Countries We Export:-

Spain, Trinidad & Tobago, South Africa, Costa Rica, Netherlands, Colombia, Tibet, Afghanistan, Greece, Mongolia, Austria, United Arab Emirates, Angola, India, Jordan, Chile, Mexico, Namibia, Japan, Israel, Macau, Argentina, Ghana, Kuwait, Ecuador, Switzerland, Nigeria, Ukraine, Bulgaria, Poland, South Korea, Chile, United States, Hungary, Bhutan, Norway, Kazakhstan, Belarus, Czech Republic, Morocco, Italy, Denmark, Venezuela, Lebanon, Zimbabwe, Belgium, Slovakia, Yemen, Puerto Rico, Algeria,Sri Lanka.