Alloy Steel Gr WP5 Buttweld Fittings
What is Alloy Steel Gr WP5 Buttweld Fittings
Sumit Impex is one of the pioneers in gathering, giving and exchanging Alloy Steel WP5 Buttweld Fittings. Our exceptional thing, grade WP5 Alloy Steel Pipe Fitting is definitely not hard to present and gives a strong hold over channels of changing sizes attached to it. AS WP5 Buttweld Fittings are conveyed with extraordinary rough materials to withstand the heaviness of water or some other fluid. They can relate at any rate four pipes together to empower the liquid to stream effectively in different ways at the same time. Our offered extent of ASTM A234 WP5 Alloy Steel Buttweld Fittings offers durability, smoothness, scouring restriction, thick dividers, and least unevenness. These pipe fittings are used in various undertakings for giving a non-spilling directing affiliation. Along these lines, they are made of premium quality in fluctuating sizes with adequate internal and outer fulfillment. They are open in different separations crosswise over and types which join Alloy Steel WP5 Elbow, Reducer, Stub End, Tee and Long Radius Bend pipe fittings and some more.

Alloy Steel 3d Pipe Bend, Alloy Steel WP5 Pipe Reducer, Alloy Steel Wp5 Elbow, ANSI A234 Alloy Steel WP5 Butt weld Fittings, Alloy Steel Wp5 Elbow, Alloy Steel WP5 Pipe Fittings, Alloy Steel WP5 Equal Tee, ASME SA234 Chrome Moly Alloy Steel Gr. WP5 Cross Exporter in India.
Sumit Impex and Alloys is a perceived trader of Alloy Steel WP5 Butt Weld Pipe Fittings, which is proposed for mechanical and weight applications and is in like manner satisfactory for customary uses in steam, gas, transporters and water. Mix Steel WP5 Pipe Fittings is known for its Excellent Cold Bending and Welding Properties, Flat Clean, Shot Blasted and Primed Finished Materials, Through Hardened for Long Wear Life, etc. Compound Steel WP5 Elbow is moreover known for its Grain-Refined, High Impact Properties, Robust improvement, Corrosion hindrance, User-kind air, Convenient to present, Superb fruition, Rust proof, and so on.
We are among the veterans in the matter of Alloy Steel WP5 Cross, which are created utilizing high assessment metal and composites for being sheltered towards disintegration and warmth expansion. We are the stalwarts in giving, exchanging and gathering a wide accumulation of Alloy Steel WP5 Reducer, which are made open in various shapes, evaluates and can similarly be adjusted according to clients’ subtleties
Specification:- Alloy Steel Gr WP5 Buttweld Fittings
Specification | ASTM A234 / ASME SA234 |
Standard | EN, ISO, DIN, JIS, NPT |
Dimension Standard | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Size | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP317L Pipe Fitting |
Type | Seamless / Welded / Fabricated |
Pressure-Temperature Class | 150LB, 300LB, 600LB, 1500LB, 2500LB. |
Schedule | Schedule 5 TO Schedule XXS. |
Type Of Dimension | BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313 |
Chemical Composition:- Alloy Steel Gr WP5 Buttweld Fittings
Grade | C | Mn | Si | S | P | Cr | Mo |
A234 WP5 | ≤0.15 | ≤0.6 | ≤0.5 | ≤0.04 | ≤0.03 | 4-6 | 0.44-0.65 |
Mechanical Properties:- Alloy Steel Gr WP5 Buttweld Fittings
Grade | Tensile Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
A234 WP5 | 415 – 585 | ≥205 | ≥20 |
Dimensions:- Alloy Steel Gr WP5 Buttweld Fittings

Nominal Pipe Size | Outside Diameter | Caps | Straight Tees | Straight Crosses | Stub Ends | |||
inch | mm | inch | Length (inch) | Center to End (inch) | Center to End (inch) | Lap Diameter (inch) | Long Length (inch) | Short Length (inch) |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Pressure Rating:- Alloy Steel Gr WP5 Buttweld Fittings
(oF) | (oC) | 150 |
-20 to 150 | -29 to 66 | 300 |
200 | 93 | 265 |
250 | 121 | 225 |
300 | 149 | 185 |
350 | 177 | 150 |
400 | 204 | - |
450 | 232 | - |
500 | 260 | - |
550 | 288 | - |
Weight Chart:- Alloy Steel Gr WP5 Buttweld Fittings
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
900 Elbow | 450 Elbow | Equal tee | 900 Elbow | 450 Elbow | Equal tee | 900 Elbow | 450 Elbow | Equal tee | |
8 | 0.02 | 0.01 | 0.03 | 0.03 | 0.02 | 0.06 | 0.04 | 0.03 | 0.07 |
10 | 0.03 | 0.02 | 0.05 | 0.03 | 0.02 | 0.03 | 0.06 | 0.04 | 0.09 |
15 | 0.06 | 0.03 | 0.09 | 0.08 | 0.04 | 0.10 | 0.10 | 0.05 | 0.14 |
20 | 0.07 | 0.03 | 0.13 | 0.08 | 0.04 | 0.17 | 0.11 | 0.05 | 0.20 |
25 | 0.14 | 0.08 | 0.28 | 0.15 | 0.11 | 0.29 | 0.22 | 0.14 | 0.38 |
32 | 0.23 | 0.11 | 0.49 | 0.26 | 0.17 | 0.59 | 0.40 | 0.23 | 0.68 |
40 | 0.30 | 0.17 | 0.68 | 0.40 | 0.23 | 0.86 | 0.51 | 0.29 | 1.02 |
50 | 0.50 | 0.25 | 0.85 | 0.70 | 0.4 | 1.28 | 0.91 | 0.59 | 1.59 |
65 | 0.85 | 0.48 | 1.41 | 1.40 | 0.77 | 2.19 | 1.81 | 0.99 | 3.13 |
80 | 1.25 | 0.63 | 1.77 | 2.20 | 1.08 | 3.31 | 2.97 | 1.50 | 4.45 |
90 | 1.70 | 0.75 | 2.67 | 2.83 | 1.42 | 4.08 | 4.00 | 2.00 | 5.44 |
100 | 2.10 | 1.08 | 3.46 | 4.47 | 2.09 | 5.27 | 6.18 | 2.81 | 7.71 |
150 | 5.45 | 2.72 | 8.07 | 10.89 | 5.44 | 10.99 | 16.32 | 8.16 | 13.61 |
200 | 10.20 | 5.33 | 15.65 | 21.54 | 10.77 | 20.91 | 33.11 | 16.56 | 28.12 |
250 | 18.15 | 9.75 | 26.46 | 38.56 | 19.27 | 35.38 | 51.71 | 25.86 | 49.90 |
300 | 25.80 | 13.62 | 39.46 | 59.42 | 29.71 | 62.14 | 79.38 | 39.69 | 83.91 |
DN | Schedule 10S | Schedule 40S | Schedule 80S | ||||||
Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | Con reducer | Ecc reducer | Reducing tee | |
40x.25 | 0.19 | 0.19 | 0.60 | 0.26 | 0.26 | 0.76 | 0.34 | 0.34 | 0.90 |
50x25 | 0.28 | 0.28 | 0.73 | 0.40 | 0.40 | 1.10 | 0.54 | 0.54 | 1.37 |
50x40 | 0.31 | 0.31 | 0.76 | 0.45 | 0.45 | 1.15 | 0.59 | 0.59 | 1.43 |
80x.50 | 0.55 | 0.55 | 1.56 | 1.00 | 1.00 | 2.91 | 1.79 | 1.79 | 3.91 |
100x50 | 0.78 | 0.78 | 2.94 | 1.50 | 1.50 | 4.48 | 1.95 | 1.95 | 6.55 |
100x80 | 0.87 | 0.87 | 3.04 | 1.74 | 1.74 | 4.64 | 2.33 | 2.33 | 6.79 |
150x80 | 1.82 | 1.82 | 6.86 | 3.95 | 3.95 | 9.68 | 5.51 | 5.51 | 11.57 |
150x100 | 1.96 | 1.96 | 7.10 | 4.07 | 4.07 | 11.94 | 5.96 | 5.96 | 11.97 |
200x100 | 3.01 | 3.01 | 13.46 | 6.55 | 6.55 | 17.98 | 9.23 | 9.23 | 24.18 |
200x150 | 3.19 | 3.19 | 14.08 | 6.74 | 6.74 | 18.82 | 10.12 | 10.12 | 25.31 |
Different Types:- Alloy Steel Gr WP5 Buttweld Fittings
ASTM A234 Alloy WP5 Butt weld Fitting | Alloy Steel WP5 Seamless Fitting |
A234 Alloy WP5 Short Radius Elbow | Alloy Steel WP5 Concentric Reducer |
Alloy WP5 Equal Tee | Alloy Steel WP 5 Unequal Tee |
WP5 Alloy Steel Fitting Cross | Alloy Steel WP 5 Pipe Bends |
Alloy Steel WP5 180 Deg bend | ASTM A234 Alloy WP5 Short Stub end |
Alloy Steel WP5 End Cap | Alloy WP5 Dish Cap |
Price List:- Alloy Steel Gr WP5 Buttweld Fittings
- Alloy Steel WP5 Reducer
USD $2.1 – $10.03 / Kg - Alloy Steel Gr WP5 Elbow
USD $2.05 – $10.18 / Kg - WP5 Alloy Steel Bend
USD $2.45 – $10.48 / Kg - Alloy Steel WP5 Stud End
USD $2.18 – $10.81 / Kg - WP5 Alloy Steel Cross
USD $2.14 – $10.45 / Kg - ASTM A234 Alloy WP5 Long Radius Elbow
USD $2.11 – $5.2 / Kg - Alloy Steel WP5 Nipple
USD $2.13 – $10.92 / Kg

Application Industries
- Construction
- Bridges
- Petrochemical Industry
- Ship Building
- Engineering
- General Structural Purposes
- Offshore and Onshore Services

Packaging Industries
We Sumit Impex Metal Ensure the Best Quality of Packing, Because It Plays an Important Role Especially in the Case of International Shipments in Which Consignment Passes Through Various Channels to Reach the Ultimate Destination, So We Put Extraordinary Concern Regarding Packaging.
We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
- Boxes and Crates
- Shrink-wrapped
- Carton boxes
- Wooden pallets
- Wooden boxes
- Wooden crates

Testings (Destructive, Non Destructive)
- Mechanical Testing Such as Tensile, Elongation, Reduction of Area
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
- Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
- Positive Material Identification – PMI Testing
- Chemical Analysis – Spectro Analysis
- Intergranular Corrosion (IGC) Test
- Pitting Resistance Test
- Dye Penetrant Test (DP Test)
- Bend Test
- Micro Test
- Macro Test
- Hardness Test
- Flaring Test
- Flattening Test
- Hydrostatic Test
- Radiography Test
- Ultra Sonic Test (UT)
- Eddy Current Testing
- Impact Test
