Duplex 2205/S32205 Forged Fittings
What is Duplex 2205/S32205 Forged Fittings
Sumit Impex offers a wide extent of Duplex Steel S32205 Forged Threaded Fittings, which are offered by us in variegated sizes and estimations at industry driving rates. Duplex Steel S32205 Forged Threaded Elbow depicts a gathering of solidified steels that are neither totally austenitic, as 304 flawless, nor completely ferritic, as 430 faultless. Duplex Steel S32205 Forged Threaded Tee is the most extensively used duplex tempered steel level and is portrayed by exceptional yield quality, twofold that of the standard austenitic solidified steel levels. Duplex Steel S32205 Forged Threaded Cross is routinely used in Marine Industry and Shipbuilding, for instance, in Propellers and Shafts, Rudders, Shaft Seals, Pumps, Bolts and Fasteners, Valves, Instrumentation, Oil and Chemical Tankers. In the meantime, these Duplex Steel S32205 Forged Threaded Cap are similarly being offered in different sizes and shapes to our customers. Despite when the rigging has satisfactory power, settlement must be made for higher spring – back achieved by the high caliber of Duplex Steel

2205 Duplex Steel Forged Threaded 90deg. Elbow, Duplex Steel UNS SS31803 Threaded Bushing, Duplex Steel Threaded Fitting, Duplex Steel S31803 Threaded Fittings, Duplex Steel S31803 Threaded Cap, Duplex Steel S32205 Threaded Pipe Elbow Supplier in Mumbai, India.
Specification:- Duplex 2205/S32205 Forged Fittings
Specification | ASTM A182 / ASME SA182 |
Dimension Standard | ASME B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, MSS-SP-97, BS3799 |
Size | 1/8" NB to 4" NB |
Type | Socketweld Fittings, Screwed-Threaded Fittings |
Pressure-Temperature Class | Threaded End - 2000 /3000/ 6000 LBS. Socket-weld End - 3000 / 6000/ 9000 LBS. |
Equivalent Grade:- Duplex 2205/S32205 Forged Fittings
STANDARD | WERKSTOFF NR. | UNS |
Duplex 2205 | 1.4462 | S31803 / S32205 |
Chemical Composition:- Duplex 2205/S32205 Forged Fittings
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
UNS S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 - 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Mechanical Properties:- Duplex 2205/S32205 Forged Fittings
Grades | Density (g/cm 3) | Melting Point | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min |
UNS S32205 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 | 15 % |
Dimensions:- Duplex 2205/S32205 Forged Fittings

ASME b16.9 Fittings Normal Pipe Size | ANSI b16 9 Pipe Fitting O D Y | Wall Thickness T (Pipe Elbow Sch.) | LR 45 Deg Elbows Centre to Face B | SR 45 Deg Elbows Weight | LR 90 Deg Elbows Centre to Face A | LR 90 Deg Elbows Weight In Below | SR 90 Deg Elbows Centre to Face A | SR 90 Deg Elbows Weight In Below | ||
mm | inch | mm | mm | Schedule | mm | kg | mm | kg | mm | kg |
15 | 1/2” | 21.3 | 2.78 | STD | 15.9 | 0.04 | 38.1 | 0.08 | – | – |
3.73 | X.S | 15.9 | 0.05 | 38.1 | 0.10 | – | – | |||
20 | 3/4” | 26.7 | 2.87 | STD | 11.1 | 0.04 | 28.6 | 0.08 | – | – |
3.91 | X.S | 11.1 | 0.05 | 28.6 | 0.11 | – | – | |||
25 | 1” | 33.4 | 3.38 | STD | 22.2 | 0.09 | 38.1 | 0.15 | 25.4 | 0.11 |
4.55 | X.S | 22.2 | 0.11 | 38.1 | 0.19 | 25.4 | 0.14 | |||
32 | 11/4” | 42.2 | 3.56 | STD | 25.4 | 0.14 | 47.6 | 0.28 | 31.75 | 0.18 |
4.85 | X.S | 25.4 | 0.2 | 47.6 | 0.39 | 31.75 | 0.24 | |||
40 | 11/2” | 48.3 | 3.68 | STD | 28.6 | 0.2 | 57.1 | 0.4 | 38.1 | 0.26 |
5.08 | X.S | 28.6 | 0.25 | 57.1 | 0.5 | 38.1 | 0.35 | |||
50 | 2” | 60.3 | 3.91 | STD | 34.9 | 0.36 | 76.2 | 0.72 | 50.8 | 0.5 |
5.54 | X.S | 34.9 | 0.5 | 76.2 | 1.0 | 50.8 | 0.68 | |||
65 | 21/2” | 73.0 | 5.16 | STD | 44.4 | 0.73 | 95.2 | 1.46 | 63.5 | 0.95 |
7.01 | X.S | 44.4 | 0.91 | 95.2 | 1.82 | 63.5 | 1.27 | |||
80 | 3” | 88.9 | 5.49 | STD | 50.8 | 1.1 | 114.3 | 2.18 | 76.2 | 1.45 |
7.62 | X.S | 50.8 | 1.45 | 114.3 | 2.86 | 76.2 | 1.95 | |||
100 | 4” | 114.3 | 6.02 | STD | 63.5 | 2.1 | 152.4 | 4.2 | 101.6 | 2.8 |
8.56 | X.S | 63.5 | 2.9 | 152.4 | 5.7 | 101.6 | 3.9 | |||
125 | 5” | 141.3 | 6.65 | STD | 79.4 | 3.4 | 190.0 | 6.8 | 127.0 | 4.8 |
9.5 | X.S | 79.4 | 5.0 | 190.0 | 10.0 | 127.0 | 6.5 | |||
150 | 6” | 168.3 | 7.11 | STD | 95.2 | 5.1 | 229.0 | 10.1 | 152.4 | 6.8 |
10.97 | X.S | 95.2 | 7.7 | 229.0 | 15.3 | 152.4 | 10.2 | |||
200 | 8” | 219.1 | 8.18 | STD | 127.0 | 10.2 | 305.0 | 20.4 | 203.0 | 13.6 |
12.7 | X.S | 127.0 | 15.5 | 305.0 | 30.9 | 203.0 | 20.9 | |||
250 | 10” | 273.9 | 9.27 | STD | 159.0 | 18.1 | 381.0 | 36.1 | 254.0 | 24.1 |
12.7 | X.S | 159.0 | 24.4 | 381.0 | 48.8 | 254.0 | 32.5 | |||
300 | 12” | 323.9 | 9.52 | STD | 190.0 | 26.6 | 457.0 | 53.1 | 305.0 | 35.4 |
12.7 | X.S | 190.0 | 35.0 | 457.0 | 70.0 | 305.0 | 46.7 | |||
350 | 14” | 355.6 | 9.52 | STD | 222.0 | 34.1 | 533.0 | 68.1 | 356.0 | 45.4 |
12.7 | X.S | 222.0 | 45.0 | 533.0 | 90.0 | 356.0 | 60.0 | |||
400 | 16” | 406.4 | 9.52 | STD | 254.0 | 45.0 | 610.0 | 89.3 | 406.0 | 59.5 |
12.7 | X.S | 254.0 | 59.0 | 610.0 | 118.0 | 406.0 | 78.7 | |||
450 | 18” | 457.0 | 9.52 | STD | 286.0 | 56.5 | 686.0 | 113.0 | 457.0 | 75.6 |
12.7 | X.S | 286.0 | 75.0 | 686.0 | 150.0 | 457.0 | 100.0 | |||
500 | 20” | 508.0 | 9.52 | STD | 318.0 | 85.0 | 762.0 | 140.0 | 508.0 | 93.5 |
12.7 | X.S | 318.0 | 112.5 | 762.0 | 186.0 | 508.0 | 124.0 | |||
600 | 24” | 610.00 | 9.52 | STD | 381.0 | 101.5 | 914.0 | 203.0 | 610.0 | 135.0 |
12.7 | X.S | 381.0 | 134.5 | 914.0 | 269.0 | 610.0 | 179.0 |
Pressure Rating:- Duplex 2205/S32205 Forged Fittings
Pressure-Temperature | |||||
Temperature | Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Weight Chart:- Duplex 2205/S32205 Forged Fittings
Normal Pipe Sizes | A | B | QTY | Weight In KG |
¼ | 0.81 | 0.88 | 160 | 0.20 |
⁄ | 0.97 | 1.00 | 130 | 0.26 |
½ | 1.12 | 1.31 | 100 | 0.57 |
¾ | 1.31 | 1.5 | 75 | 0.71 |
1 | 1.5 | 1.81 | 40 | 1.08 |
1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
1 ½ | 2.00 | 2.44 | 18 | 2.38 |
2 | 2.38 | 2.97 | 10 | 3.55 |
2 ½ | 3.00 | 3.62 | 4 | 6.22 |
3 | 3.38 | 4.31 | 2 | 10.36 |
4 | 4.19 | 5.75 | 1 | 23.91 |
Different Types:- Duplex 2205/S32205 Forged Fittings
WNR. 1.4462 Threaded Forged Fittings | Duplex S32205 Forged Fittings |
Duplex S32205 Threaded Lateral Tee | Duplex S32205 45 Deg Forged Threaded Elbow |
ASTM B182 Duplex S32205 90 Deg Threaded Elbow | Duplex S32205 Threaded Cross |
Duplex S32205 Threaded Cross | Duplex S32205 Threaded Cap |
Duplex S32205 Threaded Coupling | Duplex S32205 Threaded Union |
Duplex S32205 Threaded Bushing | Duplex S32205 Forged Threaded Plug |
Price List:- Duplex 2205/S32205 Forged Fittings
- Duplex 32205 Elbow
USD $3.1 – $10.03 / Kg - Duplex S32205 Pipe Nipple
USD $3.01 – $10.16 / Kg - Duplex Steel 2205 Hex Plug
USD $3.31 – $10.46 / Kg - Duplex 32205 Coupling
USD $3.8 – $10.11 / Kg - UNS S32205 Nipple Branch Outlet
USD $3.13 – $10.45 / Kg - ASTM A182 Duplex 32205 Reducing Cross
USD $3.7 – $8.1 / Kg - DIN 1.4462 Olet
USD $3.11 – $10.92 / Kg

Application Industries
- Construction
- Bridges
- Petrochemical Industry
- Ship Building
- Engineering
- General Structural Purposes
- Offshore and Onshore Services

Packaging Industries
We Sumit Impex Metal Ensure the Best Quality of Packing, Because It Plays an Important Role Especially in the Case of International Shipments in Which Consignment Passes Through Various Channels to Reach the Ultimate Destination, So We Put Extraordinary Concern Regarding Packaging.
We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
- Boxes and Crates
- Shrink-wrapped
- Carton boxes
- Wooden pallets
- Wooden boxes
- Wooden crates

Testings (Destructive, Non Destructive)
- Mechanical Testing Such as Tensile, Elongation, Reduction of Area
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
- Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
- Positive Material Identification – PMI Testing
- Chemical Analysis – Spectro Analysis
- Intergranular Corrosion (IGC) Test
- Pitting Resistance Test
- Dye Penetrant Test (DP Test)
- Bend Test
- Micro Test
- Macro Test
- Hardness Test
- Flaring Test
- Flattening Test
- Hydrostatic Test
- Radiography Test
- Ultra Sonic Test (UT)
- Eddy Current Testing
- Impact Test
