Nickel Alloy 201 Buttweld Fittings

What is Nickel Alloy 201 Buttweld Fittings

Sumit Impex is one of the pioneer seller and whole dealer of significant worth Nickel Alloy 201 Butt Weld Pipe Fittings, which effectively restricts water containing hydrogen sulfide or carbon dioxide. The obstacle of Nickel 201 Elbow Butt Weld Pipe Fittings to disintegration by refined and typical waters is magnificent. In refined water, the utilization pace of Nickel 201 Tee Butt Weld Pipe Fittings has been seen to be less. Disintegration paces of Nickel 201 Cross Butt Weld Pipe Fittings in family warmed water up to 200 Degree F (95 Degree C) are regularly less and only now and again high. In refined water splashed with 50/50 carbon dioxide and air at 160 Degree F (71 Degree C), the disintegration pace of Nickel 201 Reducer Butt Weld Pipe Fittings is less. Nickel 201 Bend Butt Weld Pipe Fittings is used for oil well strainers where utilization by hydrogen sulfide and salt water must be combatted.

Nickel 201 Pipe Elbow, Nickel 3d Pipe Bend, Nickel 201 Pipe Fittings, 201 Nickel Alloy Reducer, Supplier of Nickel 201 45 degree Elbow, Nickel GOST НП-2 Butt weld Elbow, Nickel 201 Pipe bend Supplier in India.

Nickel 201 Stub End gives exceptional organization in spilling sea water even at rapid, yet in stale or low – speed sea water extraordinary neighborhood strike may occur under fouling living things or various stores. In steam – bubbling water systems where the steam contains carbon dioxide and air in explicit degrees, disintegration paces of Nickel 201 End Pipe Cap will be from the start high yet will lessen with time if conditions bolster the improvement of a guarded film.

Alloy 201 Butt Weld Fittings are commercially pure or low alloy nickel finds its main application in chemical processing and electronics.Because of pure nickel’s corrosion resistance, particularly to various reducing chemicals and especially to caustic alkalis, these UNS N02201 Pipe Fittings is used to maintain product quality in many chemical reactions, particularly the processing of foods and synthetic fibre manufacture.

Specification:- Nickel Alloy 201 Buttweld Fittings

Specification	ASTM B366 / ASME SB366
Standard	EN, ISO, DIN, JIS, NPT
Dimension Standard	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness	SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Size	1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASTM A403 Grade WP317L Pipe Fitting
Type	Seamless / Welded / Fabricated
Pressure-Temperature Class	150LB, 300LB, 600LB, 1500LB, 2500LB.
Schedule	Schedule 5 TO Schedule XXS.
Type Of Dimension	BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313

Equivalent Grade:- Nickel Alloy 201 Buttweld Fittings

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Nickel 201	2.4068	N02201	NW 2201	NA 12	НП-2	–	LC-Ni 99

Chemical Composition:- Nickel Alloy 201 Buttweld Fittings

Grade	C	Mn	Si	S	Cu	Fe	Ni
Nickel 201	0.02 max	0.35 max	0.35 max	0.01 max	0.25 max	0.40 max	99.0 min

Mechanical Properties:- Nickel Alloy 201 Buttweld Fittings

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Nickel 201	8.9 g/cm3	1446 °C (2635 °F)	Psi – 67000 , MPa – 462	Psi – 21500 , MPa – 148	45 %

Dimensions:- Nickel Alloy 201 Buttweld Fittings

Nominal Pipe Size	Outside Diameter		Caps	Straight Tees	Straight Crosses	Stub Ends
inch	mm	inch	Length (inch)	Center to End (inch)	Center to End (inch)	Lap Diameter (inch)	Long Length (inch)	Short Length (inch)
1/2	21.3	0.840	1	1	–	1 3/8	3	2
3/4	26.7	1.050	1	1 1/8	–	1 11/16	3	2
1	33.4	1.315	1 1/2	1 1/2	1 1/2	2	4	2
1 1/4	42.2	1.660	1 1/2	1 7/8	1 7/8	2 1/2	4	2
1 1/2	48.3	1.900	1 1/2	2 1/4	2 1/4	2 7/8	4	2
2	60.3	2.375	1 1/2	2 1/2	2 1/2	3 5/8	6	2 1/2
2 1/2	73.0	2.875	1 1/2	3	3	4 1/8	6	2 1/2
3	88.9	3.500	2	3 3/8	3 3/8	5	6	2 1/2
3 1/2	101.6	4.000	2 1/2	3 3/4	3 3/4	5 1/2	6	3
4	114.3	4.500	2 1/2	4 1/8	4 1/8	6 3/16	6	3
5	141.3	5.563	3	4 7/8	4 7/8	7 5/16	8	3
6	168.3	6.625	3 1/2	5 5/8	5 5/8	8 1/2	8	3 1/2
8	219.1	8.625	4	7	7	10 5/8	8	4
10	273.1	10.750	5	8 1/2	8 1/2	12 3/4	10	5
12	323.9	12.750	6	10	10	15	10	6

Pressure Rating:- Nickel Alloy 201 Buttweld Fittings

(oF)	(oC)	150
-20 to 150	-29 to 66	300
200	93	265
250	121	225
300	149	185
350	177	150
400	204	-
450	232	-
500	260	-
550	288	-

Weight Chart:- Nickel Alloy 201 Buttweld Fittings

DN	Schedule 10S			Schedule 40S			Schedule 80S
900 Elbow	450 Elbow	Equal tee	900 Elbow	450 Elbow	Equal tee	900 Elbow	450 Elbow	Equal tee
8	0.02	0.01	0.03	0.03	0.02	0.06	0.04	0.03	0.07
10	0.03	0.02	0.05	0.03	0.02	0.03	0.06	0.04	0.09
15	0.06	0.03	0.09	0.08	0.04	0.10	0.10	0.05	0.14
20	0.07	0.03	0.13	0.08	0.04	0.17	0.11	0.05	0.20
25	0.14	0.08	0.28	0.15	0.11	0.29	0.22	0.14	0.38
32	0.23	0.11	0.49	0.26	0.17	0.59	0.40	0.23	0.68
40	0.30	0.17	0.68	0.40	0.23	0.86	0.51	0.29	1.02
50	0.50	0.25	0.85	0.70	0.4	1.28	0.91	0.59	1.59
65	0.85	0.48	1.41	1.40	0.77	2.19	1.81	0.99	3.13
80	1.25	0.63	1.77	2.20	1.08	3.31	2.97	1.50	4.45
90	1.70	0.75	2.67	2.83	1.42	4.08	4.00	2.00	5.44
100	2.10	1.08	3.46	4.47	2.09	5.27	6.18	2.81	7.71
150	5.45	2.72	8.07	10.89	5.44	10.99	16.32	8.16	13.61
200	10.20	5.33	15.65	21.54	10.77	20.91	33.11	16.56	28.12
250	18.15	9.75	26.46	38.56	19.27	35.38	51.71	25.86	49.90
300	25.80	13.62	39.46	59.42	29.71	62.14	79.38	39.69	83.91

DN	Schedule 10S			Schedule 40S			Schedule 80S
Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee
40x.25	0.19	0.19	0.60	0.26	0.26	0.76	0.34	0.34	0.90
50x25	0.28	0.28	0.73	0.40	0.40	1.10	0.54	0.54	1.37
50x40	0.31	0.31	0.76	0.45	0.45	1.15	0.59	0.59	1.43
80x.50	0.55	0.55	1.56	1.00	1.00	2.91	1.79	1.79	3.91
100x50	0.78	0.78	2.94	1.50	1.50	4.48	1.95	1.95	6.55
100x80	0.87	0.87	3.04	1.74	1.74	4.64	2.33	2.33	6.79
150x80	1.82	1.82	6.86	3.95	3.95	9.68	5.51	5.51	11.57
150x100	1.96	1.96	7.10	4.07	4.07	11.94	5.96	5.96	11.97
200x100	3.01	3.01	13.46	6.55	6.55	17.98	9.23	9.23	24.18
200x150	3.19	3.19	14.08	6.74	6.74	18.82	10.12	10.12	25.31

Different Types:- Nickel Alloy 201 Buttweld Fittings

ASTM B366 Alloy 201 Butt weld Fitting	Nickel Alloy 201 Seamless Fitting
Nickel Alloy 201 Elbow	Alloy UNS N02201 45 Elbow
Alloy UNS N02201 Long Radius Elbow	B366 Alloy 201 Short Radius Elbow
Nickel Alloy 201 Eccentric Reducer	Alloy 201 Equal Tee
Alloy 201 Lateral Tee	201 Nickel Alloy Fitting Cross
Alloy 201 U Bend	Nickel Alloy 201 180 Deg bend

Price List:- Nickel Alloy 201 Buttweld Fittings

Nickel 201 Reducer
USD $8.1 – $20.03 / Kg
Nickel 201 Elbow
USD $8.05 – $20.18 / Kg
Nickel 201 Bend
USD $8.45 – $20.48 / Kg
Nickel 201 Stud End
USD $8.18 – $20.81 / Kg
UNS N02201 Cross
USD $8.14 – $20.45 / Kg
Astm B366 Nickel 201 Long Radius Elbow
USD $8.11 – $13.2 / Kg
DIN 2.4068 Nipple
USD $8.13 – $20.92 / Kg

Application Industries

These material are not a single material but the name for a family of corrosion resistant steels. Like many scientific breakthrough the origins of stainless steel lies in a lucky accident. From the smallest part of zipper to the largest building skyscraper, stainless steel is an essential part of modern life.Stainless steel’s strength, resistance to corrosion and low maintenance make it the ideal material for a wide range of applications. It is also has a long life cycle and is 100% recyclable.

Construction
Bridges
Petrochemical Industry
Ship Building
Engineering
General Structural Purposes
Offshore and Onshore Services

Packaging Industries

We Sumit Impex Metal Ensure the Best Quality of Packing, Because It Plays an Important Role Especially in the Case of International Shipments in Which Consignment Passes Through Various Channels to Reach the Ultimate Destination, So We Put Extraordinary Concern Regarding Packaging.

We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,

Testings (Destructive, Non Destructive)

Mechanical Testing Such as Tensile, Elongation, Reduction of Area
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
Positive Material Identification – PMI Testing
Chemical Analysis – Spectro Analysis
Intergranular Corrosion (IGC) Test
Pitting Resistance Test
Dye Penetrant Test (DP Test)
Bend Test

Micro Test
Macro Test
Hardness Test
Flaring Test
Flattening Test
Hydrostatic Test
Radiography Test
Ultra Sonic Test (UT)
Eddy Current Testing
Impact Test

City We Deliver:-

New York, Bhopal, Howrah, Coimbatore, Chennai, Edmonton, Los Angeles, Rajkot, Mumbai, Sharjah, Cairo, Seoul, London, Jakarta, Abu Dhabi, Dammam, Nashik, Dubai, Hyderabad, Houston, Manama, Calgary, Granada, Rio de Janeiro, Navi Mumbai, Al Khobar,Kanpur, Hong Kong, Nagpur, Hanoi, Chandigarh, La Victoria, Kuala Lumpur, Bogota, Visakhapatnam.

Countries We Export:-

Spain, Trinidad & Tobago, South Africa, Costa Rica, Netherlands, Colombia, Tibet, Afghanistan, Greece, Mongolia, Austria, United Arab Emirates, Angola, India, Jordan, Chile, Mexico, Namibia, Japan, Israel, Macau, Argentina, Ghana, Kuwait, Ecuador, Switzerland, Nigeria, Ukraine, Bulgaria, Poland, South Korea, Chile, United States, Hungary, Bhutan, Norway, Kazakhstan, Belarus, Czech Republic, Morocco, Italy, Denmark, Venezuela, Lebanon, Zimbabwe, Belgium, Slovakia, Yemen, Puerto Rico, Algeria,Sri Lanka.