Stainless steel 317/317L Buttweld Fittings

What is Stainless steel 317/317L Buttweld Fittings

Sumit Impex Corporation is one of the obvious distributer and trader of astonishing SS 317 Butt Weld Pipe Fittings, which has sublime general disintegration check and is pervasive much of the time. Treated Steel 317 Elbow Butt Weld Pipe Fittings has astonishing insurance from bound utilization including cover – granular, setting and gap disintegration, where the CPT is generally at any rate 35 Degree C. Treated Steel 317 Reducer is moreover impenetrable to chloride stress disintegration parting (SCC) at temperatures of up to around 150 Degree C. Treated Steel 317 Tee Butt Weld Pipe Fittings will as often as possible perform well in circumstances which cause less than ideal frustration of austenitic assessments. Treated Steel 317 Cross Butt Weld Pipe Fittings has favored security from sea water over assessment 316. Yet treated steel has incredible high temperature oxidation impediment, Stainless Steel 317 Bend Butt Weld Pipe Fittings experience the evil impacts of embrittlement at whatever point held for even short events at temperatures more than 270 Degree C.

UNS S31000 Equal Tee, ASTM A403 SS 310 1D Elbow Supplier, Stainless Steel 310S 1.5D Elbow Exporter, DIN 1.4841 SR Return Bend Stockist, UNS S31000 Lateral Tee, SS 310S Contcentric Reducer, SS 310 Long Stud End, 310 SS Eccentric Reducer Exporter, ASTM A403 SS 310 45 Degree Elbow, ASTM A403 SS 310 1D Elbow.

Flawless 317/317L has a high tractable and creep quality at raised temperatures. Due to its extraordinary utilization restriction it has been used in dealing with immense quantities of the manufactured substances used by the mixture methodology ventures.

Sumit Impex is a primary supplier and exporter of Stainless Steel 317/317L Buttweld and Forged Fittings. We give Stainless Steel 317/317L Buttweld and Forged Fittings as per the essentials of our customers and pass on quality things on timetable.

Stainless Steel 317/317L Buttweld and Forged Tees Suppliers, B366 Stainless Steel 317/317L Long Radius Bend Pipe Fittings, 317/317L Stainless Steel Buttweld and Forged 90 deg Elbow, Stainless Steel DIN 1.4449/1.4438 Pipe Fittings Exporter, 317/317L Stainless Steel Buttweld and Forged End Pipe Cap.

Specification:- Stainless steel 317/317L Buttweld Fittings

Specification	ASTM A403 / ASME SA403
Standard	EN, ISO, DIN, JIS, NPT
Dimension Standard	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness	SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Size	1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Type	Seamless / Welded / Fabricated
Pressure-Temperature Class	150LB, 300LB, 600LB, 1500LB, 2500LB.
Schedule	Schedule 5 TO Schedule XXS.
Type Of Dimension	BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313

Equivalent Grade:- Stainless steel 317/317L Buttweld Fittings

STANDARD	UNS	WNR.	JIS	EN
SS 317	S31700	1.4449	SUS 317	-
SS 317L	S31703	1.4438	SUS 317L	X2CrNiMo18-15-4

Chemical Composition:- Stainless steel 317/317L Buttweld Fittings

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	N
317	0.08 max	2 max	1 max	0.040 max	0.03 max	18 – 20	3 – 4	11 – 14	-
317L	0.035 max	2 max	1 max	0.040 max	0.03 max	18 – 20	3 – 4	11 – 15	-

Mechanical Properties:- Stainless steel 317/317L Buttweld Fittings

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.0 g/cm3	1454 °C (2650 °F)	Psi – 75000 , MPa – 515	Psi – 30000 , MPa – 205	35 %

Dimensions:- Stainless steel 317/317L Buttweld Fittings

Nominal Pipe Size	Outside Diameter		Caps	Straight Tees	Straight Crosses	Stub Ends
inch	mm	inch	Length (inch)	Center to End (inch)	Center to End (inch)	Lap Diameter (inch)	Long Length (inch)	Short Length (inch)
1/2	21.3	0.840	1	1	–	1 3/8	3	2
3/4	26.7	1.050	1	1 1/8	–	1 11/16	3	2
1	33.4	1.315	1 1/2	1 1/2	1 1/2	2	4	2
1 1/4	42.2	1.660	1 1/2	1 7/8	1 7/8	2 1/2	4	2
1 1/2	48.3	1.900	1 1/2	2 1/4	2 1/4	2 7/8	4	2
2	60.3	2.375	1 1/2	2 1/2	2 1/2	3 5/8	6	2 1/2
2 1/2	73.0	2.875	1 1/2	3	3	4 1/8	6	2 1/2
3	88.9	3.500	2	3 3/8	3 3/8	5	6	2 1/2
3 1/2	101.6	4.000	2 1/2	3 3/4	3 3/4	5 1/2	6	3
4	114.3	4.500	2 1/2	4 1/8	4 1/8	6 3/16	6	3
5	141.3	5.563	3	4 7/8	4 7/8	7 5/16	8	3
6	168.3	6.625	3 1/2	5 5/8	5 5/8	8 1/2	8	3 1/2
8	219.1	8.625	4	7	7	10 5/8	8	4
10	273.1	10.750	5	8 1/2	8 1/2	12 3/4	10	5
12	323.9	12.750	6	10	10	15	10	6

Pressure Rating:- Stainless steel 317/317L Buttweld Fittings

(oF)	(oC)	150
-20 to 150	-29 to 66	300
200	93	265
250	121	225
300	149	185
350	177	150
400	204	-
450	232	-
500	260	-
550	288	-

Weight Chart:- Stainless steel 317/317L Buttweld Fittings

DN	Schedule 10S			Schedule 40S			Schedule 80S
900 Elbow	450 Elbow	Equal tee	900 Elbow	450 Elbow	Equal tee	900 Elbow	450 Elbow	Equal tee
8	0.02	0.01	0.03	0.03	0.02	0.06	0.04	0.03	0.07
10	0.03	0.02	0.05	0.03	0.02	0.03	0.06	0.04	0.09
15	0.06	0.03	0.09	0.08	0.04	0.10	0.10	0.05	0.14
20	0.07	0.03	0.13	0.08	0.04	0.17	0.11	0.05	0.20
25	0.14	0.08	0.28	0.15	0.11	0.29	0.22	0.14	0.38
32	0.23	0.11	0.49	0.26	0.17	0.59	0.40	0.23	0.68
40	0.30	0.17	0.68	0.40	0.23	0.86	0.51	0.29	1.02
50	0.50	0.25	0.85	0.70	0.4	1.28	0.91	0.59	1.59
65	0.85	0.48	1.41	1.40	0.77	2.19	1.81	0.99	3.13
80	1.25	0.63	1.77	2.20	1.08	3.31	2.97	1.50	4.45
90	1.70	0.75	2.67	2.83	1.42	4.08	4.00	2.00	5.44
100	2.10	1.08	3.46	4.47	2.09	5.27	6.18	2.81	7.71
150	5.45	2.72	8.07	10.89	5.44	10.99	16.32	8.16	13.61
200	10.20	5.33	15.65	21.54	10.77	20.91	33.11	16.56	28.12
250	18.15	9.75	26.46	38.56	19.27	35.38	51.71	25.86	49.90
300	25.80	13.62	39.46	59.42	29.71	62.14	79.38	39.69	83.91

DN	Schedule 10S			Schedule 40S			Schedule 80S
Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee
40x.25	0.19	0.19	0.60	0.26	0.26	0.76	0.34	0.34	0.90
50x25	0.28	0.28	0.73	0.40	0.40	1.10	0.54	0.54	1.37
50x40	0.31	0.31	0.76	0.45	0.45	1.15	0.59	0.59	1.43
80x.50	0.55	0.55	1.56	1.00	1.00	2.91	1.79	1.79	3.91
100x50	0.78	0.78	2.94	1.50	1.50	4.48	1.95	1.95	6.55
100x80	0.87	0.87	3.04	1.74	1.74	4.64	2.33	2.33	6.79
150x80	1.82	1.82	6.86	3.95	3.95	9.68	5.51	5.51	11.57
150x100	1.96	1.96	7.10	4.07	4.07	11.94	5.96	5.96	11.97
200x100	3.01	3.01	13.46	6.55	6.55	17.98	9.23	9.23	24.18
200x150	3.19	3.19	14.08	6.74	6.74	18.82	10.12	10.12	25.31

Different Types:- Stainless steel 317/317L Buttweld Fittings

SS 317 90 Elbow	Stainless Steel 317 45 Elbow
SS 317 Long Radius Elbow	Stainless Steel 317 Short Radius Elbow
UNS S31700 Eccentric Reducer	SS 317 Equal Tee
Stainless Steel 317L Welded Fitting	SS 317L 90 Elbow
SS 317L Long Radius Elbow	Stainless Steel 317L Short Radius Elbow
UNS S31703 Eccentric Reducer	SS 317L Equal Tee

Price List:- Stainless steel 317/317L Buttweld Fittings

Stainless Steel 317 Reducer
USD $2.1 – $10.01 / Kg
Stainless Steel 317L Elbow
USD $2.05 – $10.15 / Kg
SS 317 Bend
USD $2.45 – $10.45 / Kg
Stainless Steel 317L Stud End
USD $2.18 – $10.78 / Kg
UNS S31700 Cross
USD $2.14 – $10.39 / Kg
Astm A403 SS 317L Long Radius Elbow
USD $2.11 – $8 / Kg
DIN 1.4438 Nipple
USD $2.13 – $10.89 / Kg

Application Industries

These material are not a single material but the name for a family of corrosion resistant steels. Like many scientific breakthrough the origins of stainless steel lies in a lucky accident. From the smallest part of zipper to the largest building skyscraper, stainless steel is an essential part of modern life.Stainless steel’s strength, resistance to corrosion and low maintenance make it the ideal material for a wide range of applications. It is also has a long life cycle and is 100% recyclable.

Construction
Bridges
Petrochemical Industry
Ship Building
Engineering
General Structural Purposes
Offshore and Onshore Services

Packaging Industries

We Sumit Impex Metal Ensure the Best Quality of Packing, Because It Plays an Important Role Especially in the Case of International Shipments in Which Consignment Passes Through Various Channels to Reach the Ultimate Destination, So We Put Extraordinary Concern Regarding Packaging.

We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,

Testings (Destructive, Non Destructive)

Mechanical Testing Such as Tensile, Elongation, Reduction of Area
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
Positive Material Identification – PMI Testing
Chemical Analysis – Spectro Analysis
Intergranular Corrosion (IGC) Test
Pitting Resistance Test
Dye Penetrant Test (DP Test)
Bend Test

Micro Test
Macro Test
Hardness Test
Flaring Test
Flattening Test
Hydrostatic Test
Radiography Test
Ultra Sonic Test (UT)
Eddy Current Testing
Impact Test

City We Deliver:-

New York, Bhopal, Howrah, Coimbatore, Chennai, Edmonton, Los Angeles, Rajkot, Mumbai, Sharjah, Cairo, Seoul, London, Jakarta, Abu Dhabi, Dammam, Nashik, Dubai, Hyderabad, Houston, Manama, Calgary, Granada, Rio de Janeiro, Navi Mumbai, Al Khobar,Kanpur, Hong Kong, Nagpur, Hanoi, Chandigarh, La Victoria, Kuala Lumpur, Bogota, Visakhapatnam.

Countries We Export:-

Spain, Trinidad & Tobago, South Africa, Costa Rica, Netherlands, Colombia, Tibet, Afghanistan, Greece, Mongolia, Austria, United Arab Emirates, Angola, India, Jordan, Chile, Mexico, Namibia, Japan, Israel, Macau, Argentina, Ghana, Kuwait, Ecuador, Switzerland, Nigeria, Ukraine, Bulgaria, Poland, South Korea, Chile, United States, Hungary, Bhutan, Norway, Kazakhstan, Belarus, Czech Republic, Morocco, Italy, Denmark, Venezuela, Lebanon, Zimbabwe, Belgium, Slovakia, Yemen, Puerto Rico, Algeria,Sri Lanka.