Stainless Steel 317/317L Forged Fittings
What is Stainless Steel 317/317L Forged Fittings
Sumit Impex is one of the recognizable trading house and seller of incredible Stainless Steel 317 Forged Threaded Fittings, which is the basic treated steel. Like most non – solidified steels, our Stainless Steel 317 Forged Threaded Elbow can be cemented by a “stifle and-temper” heat treatment. These Stainless Steel 317 Forged Threaded Tee contains at any rate 11.5 percent chromium, just sufficient to give disintegration check properties. Our Stainless Steel 317 Forged Threaded Cross achieves most noteworthy disintegration resistance when it has been hardened and tempered and thereafter cleaned. These Stainless Steel 317 Forged Threaded Cap is an all around valuable assessment routinely gave in the hardened, yet simultaneously machinable condition, for applications where high caliber and moderate warmth and utilization hindrance are required. Our Stainless Steel 317 Forged Threaded fittings are updated for high hardness, and various properties are to some degree haggled.

ASTM A182 Stainless Steel 317 Socket Weld Fittings Supplier, SS 317 Forged Threaded 90 deg Elbow, SS 317L Socket Weld Equal Tee, SS ASTM A182 F317L Threaded Fittings, Stainless Steel 317 Forged Fittings, SS 317/317L Forged Fittings Manufacturer in India.
Formation of these Stainless Steel 317 Forged Threaded Coupling must be by procedures that consider poor weldability and as a general rule the prerequisite for a last heat treatment. Disintegration check of our Stainless Steel 317 Forged Threaded Union is lower than that of the customary austenitic assessments.
Significant working temperature extent of these Stainless Steel 317 Forged Threaded Bushing is limited by their loss of adaptability at sub – zero temperatures and loss of solidarity by completed – solidifying at raised temperatures.
Specification:- Stainless Steel 317/317L Forged Fittings
Specification | ASTM A182 / ASME SA182 |
Dimension Standard | ASME B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, MSS-SP-97, BS3799 |
Size | 1/8" NB to 4" NB |
Type | Socketweld Fittings, Screwed-Threaded Fittings |
Pressure-Temperature Class | Threaded End - 2000 /3000/ 6000 LBS. Socket-weld End - 3000 / 6000/ 9000 LBS. |
Equivalent Grade:- Stainless Steel 317/317L Forged Fittings
STANDARD | UNS | WNR. | JIS | EN |
SS 317 | S31700 | 1.4449 | SUS 317 | - |
SS 317L | S31703 | 1.4438 | SUS 317L | X2CrNiMo18-15-4 |
Chemical Composition:- Stainless Steel 317/317L Forged Fittings
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
317 | 0.08 max | 2 max | 1 max | 0.040 max | 0.03 max | 18 – 20 | 3 – 4 | 11 – 14 | - |
317L | 0.035 max | 2 max | 1 max | 0.040 max | 0.03 max | 18 – 20 | 3 – 4 | 11 – 15 | - |
Mechanical Properties:- Stainless Steel 317/317L Forged Fittings
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Dimensions:- Stainless Steel 317/317L Forged Fittings

ASME b16.9 Fittings Normal Pipe Size | ANSI b16 9 Pipe Fitting O D Y | Wall Thickness T (Pipe Elbow Sch.) | LR 45 Deg Elbows Centre to Face B | SR 45 Deg Elbows Weight | LR 90 Deg Elbows Centre to Face A | LR 90 Deg Elbows Weight In Below | SR 90 Deg Elbows Centre to Face A | SR 90 Deg Elbows Weight In Below | ||
mm | inch | mm | mm | Schedule | mm | kg | mm | kg | mm | kg |
15 | 1/2” | 21.3 | 2.78 | STD | 15.9 | 0.04 | 38.1 | 0.08 | – | – |
3.73 | X.S | 15.9 | 0.05 | 38.1 | 0.10 | – | – | |||
20 | 3/4” | 26.7 | 2.87 | STD | 11.1 | 0.04 | 28.6 | 0.08 | – | – |
3.91 | X.S | 11.1 | 0.05 | 28.6 | 0.11 | – | – | |||
25 | 1” | 33.4 | 3.38 | STD | 22.2 | 0.09 | 38.1 | 0.15 | 25.4 | 0.11 |
4.55 | X.S | 22.2 | 0.11 | 38.1 | 0.19 | 25.4 | 0.14 | |||
32 | 11/4” | 42.2 | 3.56 | STD | 25.4 | 0.14 | 47.6 | 0.28 | 31.75 | 0.18 |
4.85 | X.S | 25.4 | 0.2 | 47.6 | 0.39 | 31.75 | 0.24 | |||
40 | 11/2” | 48.3 | 3.68 | STD | 28.6 | 0.2 | 57.1 | 0.4 | 38.1 | 0.26 |
5.08 | X.S | 28.6 | 0.25 | 57.1 | 0.5 | 38.1 | 0.35 | |||
50 | 2” | 60.3 | 3.91 | STD | 34.9 | 0.36 | 76.2 | 0.72 | 50.8 | 0.5 |
5.54 | X.S | 34.9 | 0.5 | 76.2 | 1.0 | 50.8 | 0.68 | |||
65 | 21/2” | 73.0 | 5.16 | STD | 44.4 | 0.73 | 95.2 | 1.46 | 63.5 | 0.95 |
7.01 | X.S | 44.4 | 0.91 | 95.2 | 1.82 | 63.5 | 1.27 | |||
80 | 3” | 88.9 | 5.49 | STD | 50.8 | 1.1 | 114.3 | 2.18 | 76.2 | 1.45 |
7.62 | X.S | 50.8 | 1.45 | 114.3 | 2.86 | 76.2 | 1.95 | |||
100 | 4” | 114.3 | 6.02 | STD | 63.5 | 2.1 | 152.4 | 4.2 | 101.6 | 2.8 |
8.56 | X.S | 63.5 | 2.9 | 152.4 | 5.7 | 101.6 | 3.9 | |||
125 | 5” | 141.3 | 6.65 | STD | 79.4 | 3.4 | 190.0 | 6.8 | 127.0 | 4.8 |
9.5 | X.S | 79.4 | 5.0 | 190.0 | 10.0 | 127.0 | 6.5 | |||
150 | 6” | 168.3 | 7.11 | STD | 95.2 | 5.1 | 229.0 | 10.1 | 152.4 | 6.8 |
10.97 | X.S | 95.2 | 7.7 | 229.0 | 15.3 | 152.4 | 10.2 | |||
200 | 8” | 219.1 | 8.18 | STD | 127.0 | 10.2 | 305.0 | 20.4 | 203.0 | 13.6 |
12.7 | X.S | 127.0 | 15.5 | 305.0 | 30.9 | 203.0 | 20.9 | |||
250 | 10” | 273.9 | 9.27 | STD | 159.0 | 18.1 | 381.0 | 36.1 | 254.0 | 24.1 |
12.7 | X.S | 159.0 | 24.4 | 381.0 | 48.8 | 254.0 | 32.5 | |||
300 | 12” | 323.9 | 9.52 | STD | 190.0 | 26.6 | 457.0 | 53.1 | 305.0 | 35.4 |
12.7 | X.S | 190.0 | 35.0 | 457.0 | 70.0 | 305.0 | 46.7 | |||
350 | 14” | 355.6 | 9.52 | STD | 222.0 | 34.1 | 533.0 | 68.1 | 356.0 | 45.4 |
12.7 | X.S | 222.0 | 45.0 | 533.0 | 90.0 | 356.0 | 60.0 | |||
400 | 16” | 406.4 | 9.52 | STD | 254.0 | 45.0 | 610.0 | 89.3 | 406.0 | 59.5 |
12.7 | X.S | 254.0 | 59.0 | 610.0 | 118.0 | 406.0 | 78.7 | |||
450 | 18” | 457.0 | 9.52 | STD | 286.0 | 56.5 | 686.0 | 113.0 | 457.0 | 75.6 |
12.7 | X.S | 286.0 | 75.0 | 686.0 | 150.0 | 457.0 | 100.0 | |||
500 | 20” | 508.0 | 9.52 | STD | 318.0 | 85.0 | 762.0 | 140.0 | 508.0 | 93.5 |
12.7 | X.S | 318.0 | 112.5 | 762.0 | 186.0 | 508.0 | 124.0 | |||
600 | 24” | 610.00 | 9.52 | STD | 381.0 | 101.5 | 914.0 | 203.0 | 610.0 | 135.0 |
12.7 | X.S | 381.0 | 134.5 | 914.0 | 269.0 | 610.0 | 179.0 |
Pressure Rating:- Stainless Steel 317/317L Forged Fittings
Pressure-Temperature | |||||
Temperature | Class | ||||
150 | 300 | ||||
1/4 - 1 inch. | 1 1/4 - 2 inch. | 2 1/2 - 3 inch. | |||
(oF) | (oC) | ||||
-20 to 150 | -29 to 66 | 300 | 2000 | 1500 | 1000 |
200 | 93 | 265 | 1785 | 1350 | 910 |
250 | 121 | 225 | 1575 | 1200 | 825 |
300 | 149 | 185 | 1360 | 1050 | 735 |
350 | 177 | 150 | 1150 | 900 | 650 |
400 | 204 | - | 935 | 750 | 560 |
450 | 232 | - | 725 | 600 | 475 |
500 | 260 | - | 510 | 450 | 385 |
550 | 288 | - | 300 | 300 | 300 |
Weight Chart:- Stainless Steel 317/317L Forged Fittings
Normal Pipe Sizes | A | B | QTY | Weight In KG |
¼ | 0.81 | 0.88 | 160 | 0.20 |
⁄ | 0.97 | 1.00 | 130 | 0.26 |
½ | 1.12 | 1.31 | 100 | 0.57 |
¾ | 1.31 | 1.5 | 75 | 0.71 |
1 | 1.5 | 1.81 | 40 | 1.08 |
1 ¼ | 1.75 | 2.19 | 25 | 1.68 |
1 ½ | 2.00 | 2.44 | 18 | 2.38 |
2 | 2.38 | 2.97 | 10 | 3.55 |
2 ½ | 3.00 | 3.62 | 4 | 6.22 |
3 | 3.38 | 4.31 | 2 | 10.36 |
4 | 4.19 | 5.75 | 1 | 23.91 |
Different Types:- Stainless Steel 317/317L Forged Fittings
Stainless Steel 317 Threaded Forged Fittings | ASME SA182 SS 317 Forged Fittings |
SS 317L Threaded Forged Fittings | SS 317L Forged Fittings |
SS 317 45 Deg Forged Threaded Elbow | UNS S31700 45 Deg Threaded Elbow |
SS 317L 45 Deg Forged Threaded Elbow | UNS S31703 45 Deg Threaded Elbow |
SS 317 Threaded Cross | SS 317 Threaded Cap |
SS 317 Threaded Union | SS 317 Threaded Bushing |
Price List:- Stainless Steel 317/317L Forged Fittings
- Stainless Steel 317 Elbow
USD $2.1 – $10.03 / Kg - Stainless Steel 317L Pipe Nipple
USD $2.01 – $10.16 / Kg - SS 317 Hex Plug
USD $2.51 – $10.46 / Kg - Stainless Steel 317L Coupling
USD $2.8 – $10.11 / Kg - UNS S31700 Nipple Branch Outlet
USD $2.15 – $10.45 / Kg - ASTM A182 SS 317 Reducing Cross
USD $2.7 – $8.1 / Kg - DIN 1.4449 Olet
USD $2.11 – $10.92 / Kg

Application Industries
- Construction
- Bridges
- Petrochemical Industry
- Ship Building
- Engineering
- General Structural Purposes
- Offshore and Onshore Services

Packaging Industries
We Sumit Impex Metal Ensure the Best Quality of Packing, Because It Plays an Important Role Especially in the Case of International Shipments in Which Consignment Passes Through Various Channels to Reach the Ultimate Destination, So We Put Extraordinary Concern Regarding Packaging.
We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
- Boxes and Crates
- Shrink-wrapped
- Carton boxes
- Wooden pallets
- Wooden boxes
- Wooden crates

Testings (Destructive, Non Destructive)
- Mechanical Testing Such as Tensile, Elongation, Reduction of Area
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
- Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
- Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
- Positive Material Identification – PMI Testing
- Chemical Analysis – Spectro Analysis
- Intergranular Corrosion (IGC) Test
- Pitting Resistance Test
- Dye Penetrant Test (DP Test)
- Bend Test
- Micro Test
- Macro Test
- Hardness Test
- Flaring Test
- Flattening Test
- Hydrostatic Test
- Radiography Test
- Ultra Sonic Test (UT)
- Eddy Current Testing
- Impact Test
