Stainless steel 904L Buttweld Fittings

What is Stainless steel 904L Buttweld Fittings

We offer a wide extent of the Stainless Steel 904L Pipe Fittings to our general customers. These pipe fittings are delivered by us with complete consistence with the ASTM B 366 and the ANSBI B16.9, MSS SP 43, 16.28 and the welding level models of ANSI B 16.2S too. Our Stainless Steel 904L Tee is a high blend austenitic solidified steel that is known for its disintegration properties. Tempered Steel 904L Elbow is comprehensively used in applications where the utilization properties of Stainless Steel 316L and Stainless Steel 317L are not adequate. These SS 904L Butt Weld Fittings, which is in like manner extremely known as Super Austenitic Stainless Steel (UNS N08904), is a non-offset austenitic treated steel with low carbon content. This high amalgam solidified steel is added with copper to improve its assurance from strong diminishing acids, for instance, sulphuric destructive. Solidified Steel 904L Elbow is chromium – nickel tempered steel and with the extension of titanium, and is impenetrable to bury – granular disintegration. General disintegration of Stainless Steel 904L Reducer Pipe Fittings isn’t as much as SS 904, and is assurance from a variety of damaging media.

904L SS 5D Elbow, UNS N08904 LR Return Bend, 904L SS Eccentric Reducer, SS 904L 3D Elbow, 904L SS Elbow, UNS N08904 Equal Tee, ASTM A403 SS 904L 45 Degree Elbow Manufacturer, DIN 1.4539 Reducing Tee Stockist, ASME SA403 SS 904L Buttweld Reducer Exporter, SS 904L Contcentric Reducer, SS 904L Contcentric Reducer Supplier,.

Sumit Impex is had some aptitude in amassing and giving of 904L Buttweld Fittings, Pipe Fitting, Forged Fittings, Butt weld fittings in Stainless steel, compound Steel and carbon Steel Since 1982, we produce wide extent of 904L Buttweld Fittings, for instance, 904L Buttweld Elbows, 904L Buttweld Tees, 904L Buttweld Reducers.

904L Buttweld pipe end Caps, 904L Buttweld Pipe Bends, etc as indicated by International standard like ASME/ASTM/API, we are giving and exchanging 904L Buttweld Fittings in predictable and welded the two structures to more than 60 countries for over 2 decades, we have our venders and vendors in Nigeria, Australia, Malaysia, Egypt, South Africa.

General disintegration of Stainless Steel 904L Reducer Pipe Fittings isn’t as much as SS 904, and is assurance from a variety of damaging media. 904L Pipe Fittings are just one of the distinguishing strength steels open at our reason.

Specification:- Stainless steel 904L Buttweld Fittings

Specification	ASTM A403 / ASME SA403
Standard	EN, ISO, DIN, JIS, NPT
Dimension Standard	ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness	SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Size	1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Bending Radius	R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Type	Seamless / Welded / Fabricated
Pressure-Temperature Class	150LB, 300LB, 600LB, 1500LB, 2500LB.
Schedule	Schedule 5 TO Schedule XXS.
Type Of Dimension	BS1640, EN 10253 - 4, DIN 2605, JIS B2312, ANSI B16.9, MSS SP-75, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2313

Equivalent Grade:- Stainless steel 904L Buttweld Fittings

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	KS	AFNOR	EN
SS 904L	1.4539	N08904	SUS 904L	904S13	STS 317J5L	Z2 NCDU 25-20	X1NiCrMoCu25-20-5

Chemical Composition:- Stainless steel 904L Buttweld Fittings

Grade	C	Mn	Si	P	S	Cr	Mo	Ni	Cu
SS 904L	0.020 max	2.00 max	1.00 max	0.040 max	0.030 max	19.00 – 23.00	4.00 – 5.00 max	23.00 – 28.00	1.00 – 2.00

Mechanical Properties:- Stainless steel 904L Buttweld Fittings

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
7.95 g/cm3	1350 °C (2460 °F)	Psi – 71000 , MPa – 490	Psi – 32000 , MPa – 220	35 %

Dimensions:- Stainless steel 904L Buttweld Fittings

Nominal Pipe Size	Outside Diameter		Caps	Straight Tees	Straight Crosses	Stub Ends
inch	mm	inch	Length (inch)	Center to End (inch)	Center to End (inch)	Lap Diameter (inch)	Long Length (inch)	Short Length (inch)
1/2	21.3	0.840	1	1	–	1 3/8	3	2
3/4	26.7	1.050	1	1 1/8	–	1 11/16	3	2
1	33.4	1.315	1 1/2	1 1/2	1 1/2	2	4	2
1 1/4	42.2	1.660	1 1/2	1 7/8	1 7/8	2 1/2	4	2
1 1/2	48.3	1.900	1 1/2	2 1/4	2 1/4	2 7/8	4	2
2	60.3	2.375	1 1/2	2 1/2	2 1/2	3 5/8	6	2 1/2
2 1/2	73.0	2.875	1 1/2	3	3	4 1/8	6	2 1/2
3	88.9	3.500	2	3 3/8	3 3/8	5	6	2 1/2
3 1/2	101.6	4.000	2 1/2	3 3/4	3 3/4	5 1/2	6	3
4	114.3	4.500	2 1/2	4 1/8	4 1/8	6 3/16	6	3
5	141.3	5.563	3	4 7/8	4 7/8	7 5/16	8	3
6	168.3	6.625	3 1/2	5 5/8	5 5/8	8 1/2	8	3 1/2
8	219.1	8.625	4	7	7	10 5/8	8	4
10	273.1	10.750	5	8 1/2	8 1/2	12 3/4	10	5
12	323.9	12.750	6	10	10	15	10	6

Pressure Rating:- Stainless steel 904L Buttweld Fittings

(oF)	(oC)	150
-20 to 150	-29 to 66	300
200	93	265
250	121	225
300	149	185
350	177	150
400	204	-
450	232	-
500	260	-
550	288	-

Weight Chart:- Stainless steel 904L Buttweld Fittings

DN	Schedule 10S			Schedule 40S			Schedule 80S
900 Elbow	450 Elbow	Equal tee	900 Elbow	450 Elbow	Equal tee	900 Elbow	450 Elbow	Equal tee
8	0.02	0.01	0.03	0.03	0.02	0.06	0.04	0.03	0.07
10	0.03	0.02	0.05	0.03	0.02	0.03	0.06	0.04	0.09
15	0.06	0.03	0.09	0.08	0.04	0.10	0.10	0.05	0.14
20	0.07	0.03	0.13	0.08	0.04	0.17	0.11	0.05	0.20
25	0.14	0.08	0.28	0.15	0.11	0.29	0.22	0.14	0.38
32	0.23	0.11	0.49	0.26	0.17	0.59	0.40	0.23	0.68
40	0.30	0.17	0.68	0.40	0.23	0.86	0.51	0.29	1.02
50	0.50	0.25	0.85	0.70	0.4	1.28	0.91	0.59	1.59
65	0.85	0.48	1.41	1.40	0.77	2.19	1.81	0.99	3.13
80	1.25	0.63	1.77	2.20	1.08	3.31	2.97	1.50	4.45
90	1.70	0.75	2.67	2.83	1.42	4.08	4.00	2.00	5.44
100	2.10	1.08	3.46	4.47	2.09	5.27	6.18	2.81	7.71
150	5.45	2.72	8.07	10.89	5.44	10.99	16.32	8.16	13.61
200	10.20	5.33	15.65	21.54	10.77	20.91	33.11	16.56	28.12
250	18.15	9.75	26.46	38.56	19.27	35.38	51.71	25.86	49.90
300	25.80	13.62	39.46	59.42	29.71	62.14	79.38	39.69	83.91

DN	Schedule 10S			Schedule 40S			Schedule 80S
Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee	Con reducer	Ecc reducer	Reducing tee
40x.25	0.19	0.19	0.60	0.26	0.26	0.76	0.34	0.34	0.90
50x25	0.28	0.28	0.73	0.40	0.40	1.10	0.54	0.54	1.37
50x40	0.31	0.31	0.76	0.45	0.45	1.15	0.59	0.59	1.43
80x.50	0.55	0.55	1.56	1.00	1.00	2.91	1.79	1.79	3.91
100x50	0.78	0.78	2.94	1.50	1.50	4.48	1.95	1.95	6.55
100x80	0.87	0.87	3.04	1.74	1.74	4.64	2.33	2.33	6.79
150x80	1.82	1.82	6.86	3.95	3.95	9.68	5.51	5.51	11.57
150x100	1.96	1.96	7.10	4.07	4.07	11.94	5.96	5.96	11.97
200x100	3.01	3.01	13.46	6.55	6.55	17.98	9.23	9.23	24.18
200x150	3.19	3.19	14.08	6.74	6.74	18.82	10.12	10.12	25.31

Different Types:- Stainless steel 904L Buttweld Fittings

SS 904L Pipe Fitting	Stainless Steel 904L Buttweld Fitting
SS 904L 90 Elbow	Stainless Steel 904L 45 Elbow
Stainless Steel 904L Short Radius Elbow	UNS N08904 Concentric Reducer
SS 904L Equal Tee	Stainless Steel 904L Unequal Tee
UNS N08904 Fitting Cross	SS 904L Pipe Bends
Stainless Steel 904L 90 Deg bend	SS 904L Short Stub end

Price List:- Stainless steel 904L Buttweld Fittings

Stainless Steel 904L Reducer
USD $5.1 – $15.03 / Kg
Stainless Steel 904L Elbow
USD $5.05 – $15.18 / Kg
SS 904L Bend
USD $5.45 – $15.48 / Kg
Stainless Steel 904L Stud End
USD $5.18 – $15.81 / Kg
UNS N08904 Cross
USD $5.14 – $15.45 / Kg
Astm A403 SS 904L Long Radius Elbow
USD $5.11 – $8.2 / Kg
DIN 1.4539 Nipple
USD $5.13 – $9.92 / Kg

Application Industries

These material are not a single material but the name for a family of corrosion resistant steels. Like many scientific breakthrough the origins of stainless steel lies in a lucky accident. From the smallest part of zipper to the largest building skyscraper, stainless steel is an essential part of modern life.Stainless steel’s strength, resistance to corrosion and low maintenance make it the ideal material for a wide range of applications. It is also has a long life cycle and is 100% recyclable.

Construction
Bridges
Petrochemical Industry
Ship Building
Engineering
General Structural Purposes
Offshore and Onshore Services

Packaging Industries

We Sumit Impex Metal Ensure the Best Quality of Packing, Because It Plays an Important Role Especially in the Case of International Shipments in Which Consignment Passes Through Various Channels to Reach the Ultimate Destination, So We Put Extraordinary Concern Regarding Packaging.

We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,

Testings (Destructive, Non Destructive)

Mechanical Testing Such as Tensile, Elongation, Reduction of Area
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
Positive Material Identification – PMI Testing
Chemical Analysis – Spectro Analysis
Intergranular Corrosion (IGC) Test
Pitting Resistance Test
Dye Penetrant Test (DP Test)
Bend Test

Micro Test
Macro Test
Hardness Test
Flaring Test
Flattening Test
Hydrostatic Test
Radiography Test
Ultra Sonic Test (UT)
Eddy Current Testing
Impact Test

People Also Search:-

DIN 1.4539 Short Stud End Price List In India, SS 904L Buttweld Welded Cap Price List, 904L SS Barrel Nipple Weight Calculator, Stainless Steel 904L 90 Degree Elbow Price List, ASME SA403 SS 904L Equal Cross At Factory Price, UNS N08904 Short Radius Weight Calculator, SS 904L Long Stud End Catalogue, 904L SS 5D Elbow Weight Calculator, UNS N08904 LR Return Bend Price List In India, SS 904L 180 Degree Elbow Price Per Kg.

City We Deliver:-

904L SS 5D Elbow Stockist in Kerla, DIN 1.4539 Stub End Manufacturer in Vadodara, DIN 1.4539 SR Return Bend Stockist in Gujarat, DIN 1.4539 Short Stud End Supplier in Kolkata, UNS N08904 LR Return Bend Manufacturer in Daman, DIN 1.4539 Reducing Tee Stockist in Ahmedabad, Stainless Steel 904L 1.5D Elbow Exporter in Kanpur, UNS N08904 Equal Tee Manufacturer in Mumbai.

Countries We Export:-

SS 904L Contcentric Reducer Supplier in Qatar, 904L SS Elbow Exporter in Kuwait, Stainless Steel 904L 90 Degree Elbow Stockist in UK, ASME SA403 SS 904L Buttweld Reducer Exporter in Lebanon, DIN 1.4539 Short Stud End Supplier in Algeria, SS 904L Pipe Nipple Stockist in Oman, ASTM A403 SS 904L 45 Degree Elbow Manufacturer in USA, UNS N08904 Short Radius Stockist in Libya.